Here’s what I used to build my slide-out shelves! My tips for building these… - add bump outs to the sides of the cabinets so your shelves clear the cabinet doors - measure from bump out to bump out, then subtract 1” for the width of your shelves - subtract an inch or two from your cabinet depth for your shelf depth so you have wiggle room - since I used 1x3s for the sides of my shelves, I subtracted 1.5” from the shelf width and depth to figure out my plywood base measurement - just make sure you install your slides back 1/2” or so from the face frame so your doors can close! LTKhome LTKFind